Hot-swap Metal OLED D-Tap Splitter with Voltage and Watt Display-11.8 inches

Monitor your power supply during shooting with the LANZYKU Power Monitor with Hot-Swap Controller. The display shows voltage when no load is connected and both voltage and power consumption in watts under load, helping you track battery voltage and your rig’s power demand.

Supporting an 11.0–17.5V DC input range, the built-in controller combines hot-swap control with reverse-polarity, ESD, overvoltage, overcurrent, short-circuit, and surge protection. Flexible cabling and 1/4"-20 and M4 mounting threads make it easy to integrate into your camera setup.

Voltage & Power Monitoring
Displays voltage without a connected load, and voltage plus power consumption in watts while powering equipment.

Built-In Hot-Swap Controller
Manages power connection during battery changes. Continuous operation depends on the connected power configuration.

Multiple Power Protections
Helps safeguard connected equipment against reverse polarity, electrostatic discharge (ESD), overvoltage, overcurrent, short circuits, and voltage surges.

11.0–17.5V DC Input
Supports power sources within the specified input voltage range.

Versatile Mounting
Integrated 1/4"-20 and M4 threads allow attachment to cameras, cages, and rigs.

Durable, Flexible Cable
Resists cold, high temperatures, and repeated bending for demanding shooting environments.

AUX OUT

*Unreg. Rated 12V(10.5A)~17.0V(7.5A).

*Maximum sustained current draw is 125W.

*Input Voltage: 11.0–17.5V DC

*Consistently reliable power in temperatures from (-13F to 149F).

*The entire product is ESD compliant.

*Pro Professional splitter with Hot-swap*1 pc

*1/4"-20*5/16 Screws*1 pc

*M4*8 Screws*1 pcs

*3/16 L Wrench*1pc

*4mm Hex Key*1pc